Ex D aluminium enclosures

ALUMINIUM ENCLOSURES

EJB IIB – IIB+H2 SERIES

The enclosures in this series are suitable for the installation of terminals and electrical equipment such as switches, contactors, etc. They can accommodate intrinsic safety barriers and are equipped with flange covers.

Dimensions from EJB1 to EJB9A. Materials: Aluminium alloy (or cast iron upon request). Coating: Standard epoxy grey RAL7037 exterior, RAL2004 anticondensation interior. Other colours available upon request.

II 2G Ex d IIB +H2 T5 Gb, II 2D Ex tb IIIC T100°C Db, II 2G Ex d [ia Ga] IIB+H2 T5 Gb, II 2D Ex tb [ia Da]

IIIC T100°C, IP66, Tamb -60° +65°

ALUMINIUM ENCLOSURES WITH WINDOW
EJB IIB – IIB+H2 SERIES

The enclosures in this series are suitable for the installation of terminals and electrical equipment such as switches, contactors, etc. They can accommodate intrinsically safe barriers and are fitted with flanged covers. These enclosures can be provided with windows (of various sizes) to allow visualisation of electronic devices or instruments installed inside the case. Dimensions from EJB1 to EJB9A. Materials: aluminium alloy (Paint finish: standard epoxy grey RAL7037 exterior, RAL2004 anti-condensation interior. Other colours available on request.



II 2G Ex d IIB (IIB+H2) T5 Gb, II 2D Ex tb IIIC T100°C Db, II 2G Ex d [ia Ga] IIB (IIB++H2) T5 Gb, II 2D Ex tb [ia Da]

IIIC T100°C, IP66

ALUMINIUM ENCLOSURES

GUB –IIC SERIES (WITH OR WITHOUT EXTENSION)

These enclosures are used as terminal boxes or housings for electrical equipment performing interruption and protection, junction, control, and signalling functions, as well as interface units. Dimensions range from GUB to GUB07. They can be equipped with an extension to increase depth. Materials: body and cover made of aluminium alloy. Paint finish: standard epoxy RAL7037 exterior, RAL2004 anti-condensation interior. 



II 2G Ex d IIC T5/T6 Gb, II 2D Ex tb IIIC T100°/T85°C Db, II 2G Ex d [ia Ga] IIC T5/T6 Gb, II 2D Ex tb [ia Da] IIIC T100°/T85°C Db, IP66

ALUMINIUM ENCLOSURES WITH WINDOW
SERIE GUB/H – IIC

Low-copper aluminium alloy enclosures with a transparent inspection window made of tempered, heat-resistant glass, suitable for housing electrical equipment for control, measurement, and regulation purposes. Materials: body and cover in aluminium alloy. Coating: standard epoxy grey RAL7037 exterior, RAL2004 orange anti-condensation interior. Other colours available on request. 



II 2G Ex d IIC T5/T6 Gb, II 2D Ex tb IIIC T100°/T85°C Db, II 2G Ex d [ia Ga] IIC T5/T6 Gb, II 2D Ex tb [ia Da] IIIC T100°/T85°C Db, IP66

ALUMINIUM ENCLOSURES WITH WINDOW AND EXTENSION 
GUBH-E SERIES EXTENSION

Aluminium alloy enclosures with a transparent inspection window made of tempered, heat-resistant glass, suitable for housing electrical equipment for control, monitoring, measurement, and regulation. They can be equipped with extensions to increase internal depth. Materials: body and cover in aluminium alloy (cast iron available upon request). Coating: standard epoxy grey RAL7037 externally, RAL2004 anti-condensation internally. Other colours available upon request. 



II 2G Ex d IIC T5/T6 Gb, II 2D Ex tb IIIC T100°/T85°C Db, II 2G Ex d [ia Ga] IIC T5/T6 Gb, II 2D Ex tb [ia Da] IIIC T100°/T85°C Db, IP66

CAMERA HOLDERS 
VB - IIC SERIES

The camera enclosures consist of a cylindrical body with two screwed covers at each end: one for inspection and one with a window. The external surface can be threaded and drilled for mounting a galvanised sunshield or support arm. Upon request, an anti-fogging resistance can be provided. The body features two flat surfaces where threaded cable entries can be made. The GUB series offers a casing that allows for a greater number of cable entries. Standard coating.

II 2G Ex d IIC T5/T6 Gb, II 2D Ex tb IIIC T100°/T85°C Db, II 2G Ex d [ia Ga] IIC T5/T6 Gb, II 2D Ex tb [ia Da] IIIC T100°/T85°C Db, IP66

EMHA SERIES INSTRUMENT HOLDER 

IIC INSTRUMENT HOLDER 

The EMHA100 type container is made of low-copper aluminium, and the threaded cover is equipped with high-strength glass. It can be used for housing measuring instruments and digital or analogue equipment such as voltmeters, ammeters, wattmeters, etc. Electrical data: max 32Amp - 660VAC.

Paint finish: standard epoxy grey RAL7037, for other colours please specify the RAL type.

II 2G Ex d IIC T5/T6 Gb, II 2D Ex tb IIIC T100°/T85°C Db, II 2G Ex d [ia Ga] IIC T5/T6 Gb, II 2D Ex tb [ia Da] IIIC T100°/T85°C Db, IP66

JUNCTION BOX

S - IIC SERIES

The boxes in this series are used for the threading and connection of conductors. They can be supplied complete with terminals. Materials: corrosion-resistant aluminium alloy. Paint finish available only upon request. 

II 2G Ex d IIC T5/T6 Gb, II 2D Ex tb IIIC T100°/T85°C Db, II 2G Ex d [ia Ga] IIC T5/T6 Gb, II 2D Ex tb [ia Da] IIIC T100°/T85°C Db, IP66

ACCESSORIES AND OPERATORS FOR EX d ENCLOSURES

Controls, actuators, and valves are certified components for installation on Ex d enclosures.

RP series push buttons complete with NO or NC contacts.

RL series indicator lights complete with coloured lenses and LED attachment (LED excluded).

RS series selectors with 2 or 3 positions for mounting behind the cover.

M series actuators for controlling electrical devices mounted inside the enclosure.

ECD1-D series drain/breather valves.

Accessories on request: hinges, document pockets (only for certain sizes), door stop pin, handle/knob for cover opening, earth connection lug, ……