Lightning

EVFT SERIES FLUORESCENT ALUMINIUM LIGHTING FITTINGS

Ex d IIC

Lighting fittings for single or double lamp applications. Can be supplied with an emergency group to power a tube for 90 minutes (EVFT/E). Mounting types: suspension, ceiling, or pole for outdoor installation (on request). On request, protective cage in galvanised steel and reflector in painted steel. Materials: aluminium body, tempered glass protection tubes, stainless steel nuts and screws. Coating: external grey RAL7037.



II 2G Ex d IIC T6 Gb II 2D Ex tb IIIC T85°C Db IP66

EVFT/L SERIES LED LIGHTING FITTINGS IN ALUMINIUM

Ex d IIC

These fittings are designed for single-lamp applications in various lengths (600mm/1200mm/1500mm). They are supplied with LED lamps of different powers, ranging from 18W (2200Lm) to 70W (8000Lm). The reflector is integrated into the LED circuit. Emergency units can be provided. Materials: aluminium body, tempered glass protective tubes, stainless steel nuts and screws. Standard grey RAL7037 finish.



II 2G Ex d IIC T6 Gb II 2D Ex tb IIIC T85°C Db IP66

EVA SERIES ALUMINIUM LIGHTING FITTINGS

Ex d IIC

These lighting fittings are used for incandescent, halogen, LED, compact fluorescent, or mixed lamps. They are supplied with a protective cage made of stainless steel. The reflector is made of aluminium and is available on request. Models: EVA for suspension with tube or on pole, EVC for ceiling, EVD for suspension with hook, EVJ for wall with arm. Materials: aluminium body, tempered glass globe, stainless steel nuts and screws.

Painting: standard epoxy grey RAL7037.

II 2G Ex d IIC T3/T6 Gb II 2D Ex tb IIIC T200°/T85°C Db IP65

EVFT-I SERIES FLUORESCENT LIGHTING FITTINGS IN CAST IRON

I M2 Ex d (UNDERGROUND)

These fittings are produced for single-lamp or double-lamp applications, 18W or 36W. They can be supplied with an emergency unit to activate a tube for 90 minutes (EVFT-I/EM). Suspension mounting (standard), ceiling mounting (on request).

The cage and reflectors are included with the fitting. Material: cast iron body, tempered glass protection tubes, stainless steel nuts and bolts. Finish: galvanised. Painting available on request.



I M2 Ex d I Mb IP66

REVFT-I/L SERIES FLUORESCENT LIGHTING FITTINGS IN CAST IRON

I M2 Ex d (UNDERGROUND)

These fittings are designed for single-lamp applications in various lengths (600mm/1200mm/1500mm). They are supplied with LED lamps of various power ratings from 18W (2200Lm) to 70W (8000Lm). The cage and reflectors are included with the fitting. Available with an emergency unit. Materials: cast iron body, tempered glass protection tubes, stainless steel nuts and screws. Finish: galvanised. Painting available on request. 



I M2 Ex d I Mb IP66

RLQE SERIES LED FLOODLIGHTS IN GALVANISED STEEL

I M2 Ex d (UNDERGROUND)

Floodlight suitable for Gas Group IIB+H2, made of galvanised steel with high-strength sealed glass. The standard version consists of a 120W LED circuit with 60 LEDs (16,200Lm at 0.7A) and 60° optics. On request, optics with 10°, 20°, or 40° are available, as well as circuits with 12 LEDs (25W / 4,630Lm), 36 LEDs (75W / 9,720Lm), or 60 LEDs (160W / 19,800Lm at 1A). Supplied with an adjustable mounting arm and a power supply with programmable wattages. Painting available upon request.



II 2G Ex d IIB +H2 T6 Gb II 2D Ex tb IIIC T85°C Db IP66

0866 SERIES LED LIGHTING FITTINGS IN POLYCARBONATE

Ex ed IIC

2x18W and 2x36W Fluorescent Lighting Fittings. This series can be supplied with an emergency group. Voltage: AC230V, AC110V~ 240V (10%) 50/60Hz. Materials: fibreglass reinforced polyester body, transparent polycarbonate cover, good protection against chemical agents and corrosion, high stability and mechanical resistance.



II 2G Ex deq IIC T4 Gb II 2D IIIC T80°C Db IP66